top of page
Sanus XF228

Sanus XF228

With the Sanus XF228 you can easily wall-mount and precisely position your flat-panel plasma or LCD TV. Part of Sanus' VisionMount HDpro™ series, this full-motion bracket can support TVs with screen sizes from 42" to 63" and weighing up to 200 lbs. The dual articulated arms extend your TV up to 28" out from the wall. The mount lets you swivel your TV from side to side up to 75°, in either direction, and you can also tilt your TV for optimal viewing.

Sanus' QuickConnect™ system lets you attach the mounting head by simply snapping it into the arm assembly. And you can disengage it with a button push — handy if you need to remove your TV for repairs or replacement.

After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that the screen is perfectly level. The arm assembly can be also be shifted slightly left or right on the wall plate so the TV is always centered, even if your wall studs are off-center. And the mount's hollow arms let you thread cables through them, keeping them out of sight and free from tangles.

•designed for flat-panel plasma and LCD TVs 42"-63"
•supports up to 200 lbs.
•TV mounting distance from wall: up to 28"
•vertical tilt range: +5° to -15° (may vary with size of TV)
•side-to-side swivel range: +75° to -75° (may vary with size of TV)
•roll adjustment: +5° to -5°
•in-arm cable management
•stud-mounting required
•34-1/16"W x 23-3/4"H x 3-1/4"D (28"D fully extended)
•warranty: 10 years

  • Details

    Overview: The Sanus Systems VisionMount HDPro Series XF228 is a full-motion wall mount for extra-large flat panel TVs and monitors. The mount can tilt, swivel, and extend in every direction so you can attain the perfect viewing angle. This mounting bracket, black in color, features a built-in cable management system to conceal and protect your cables.

    Capacity: The XF228 is designed for 42" to 63" flat panel TVs. It has a weight capacity of up to 200 pounds.

    Bolt Pattern: The monitor bracket has multiple vertical slots and can accommodate vertical hole spacing (on the back of the TV) up to 21.625" (550mm). The unit can expand horizontally for extra large TVs. The vertical brackets can slide along the horizontal bars, accommodating a horizontal hole spacing from 5.4" (137mm) to nearly 34" (860mm). The XF228 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the brackets to your TV.

    VESA: Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
    •VESA 800 x 400
    •VESA 600 x 400
    •VESA 400 x 400
    •VESA 400 x 300
    •VESA 400 x 200
    •VESA 300 x 200
    •VESA 200 x 200
    •VESA 200 x 100

    Virtual Axis: Sanus' patented Virtual Axis tilting technology allows effortless viewing angle adjustment without the use of tools by balancing the weight of the TV on itself. You can tilt the TV up or down with just the touch of a finger, and easily reduce glare and reflections caused by lights or windows. Dual arms allow large TVs to easily extend, retract, tilt, and swivel up to 28" from the wall. The arm assembly shifts left and right on the wall plate so the TV is always centered, even if the wall studs are not. Once mounted, the TV's range of motion is as follows:
    •Tilt: -15° to +5°
    •Swivel: -75° to +75°
    •Roll: -5° to +5°
    •Extend: up to 28" from wall

    ProSet: Once installed, the TV may not appear completely
bottom of page